Sharp AR-407 - Manual (Page 131)

7-19
CHAPTER
7
FINISHER (AR-FN2)
The copier has two different finisher modes: one sorts copies into sets
matching the sequence of the originals and the second groups copies by
original. When an optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
Paper feed area cover
Top cover
Top tray
Offset tray
Stapler cover
Staple cartridge
PART NAMES
CAUTION
Do not put pressure on the finisher or subject it to undue force.
Specifications
Tray capacity Top tray: 250 sheets
Offset tray: 750 sheets
Paper size Top tray: A3 to A6R (5-1/2" x 8-1/2" to 11" x 17", 12" x 18")
Offset tray: A4 (8-1/2" x 11")
Paper weight Top tray: 52 to 128 g /m 2 (14 lbs. to 34 lbs.)
Offset tray: 56 to 128 g /m 2 (15 lbs. to 34 lbs.)
For paper weighing more than 105 g /m 2 (28 lbs.),
A4 (8-1/2" x 11") is the maximum size.
Offset Min. 15 mm for A4 (61/64 inch for 8-1/2" x 11")
Paper size A4 (8-1/2" x 11")
for stapling
Stapling capacity 30 sheets (80 g /m 2 (21 lbs.))
Power supply Drawn from the copier
Weight Approx. 22 k g (49 lbs.)
Dimensions 457 mm (W) x 518 mm (D) x 820 mm (H)
(18"(W) x 20-13/32"(D) x 32-19/64"(H))
Specifications are subject to change for improvement without notice.
OPTIONAL EQUIPMENT
Finisher (AR-FN2)