Sharp AR-407 - Manual (Page 174)

8-24
CHAPTER
8
KEY OPERATOR PROGRAMS
ENABLE/DISABLE SETTINGS
The programs of this category are used to enable or disable some
functions. These programs can be set or cancelled by pressing the
check box of each program.
Disabling of Auto Paper Selection
This program is used to prevent automatic paper selection. When
disabled, the copier will not automatically select a paper tray containing
paper that matches the size of the original placed on the document
glass or in the document feeder.
To disable auto paper selection, press the check box of
“DISABLING OF AUTO PAPER SELECTION.” to display a
check mark in the check box.
To restore this function, press the check box of this program
again to clear the check mark in the check box.
Disabling of Auto Tray Switching
This program prevents automatic switching between the paper trays.
To disable auto tray switching, press the check box of
“DISABLING OF AUTO TRAY SWITCHING.” to display a
check mark in the check box.
To restore this function, press the check box of this program
again to clear the check mark in the check box.
Disabling of Bypass-Tray in Duplex Copy
This program is used to disable the use of the bypass tray when making
duplex copies.
To disable use of the bypass tray when making duplex
copies, press the check box of “DISABLING OF BYPASS-
TRAY IN DUPLEX COPY.” to display a check mark in the
check box.
To restore use of the bypass tray, press the check box of this
program again to clear the check mark in the check box.
KEY OPERATOR’S GUIDE
Key operator programs