Sharp AR-407 - Manual (Page 163)

8-13
CHAPTER
8
To set a limit for all accounts
1. Press the “LIMIT” (ALL ACCOUNTS) key on the touch
panel.
● “ALL” will appear under “ACCOUNT NUMBER”.
2. Enter the upper limit (max. 999,999) for all accounts.
● To cancel the limit for all accounts, proceed to step 3 without
entering a limit.
3. Press the “ENTER” key.
4. Press the “OK” key to exit the program.
Account Number Security
This program is used to make it difficult for users to gain access to
accounts by entering code numbers through trial and error. If this
program is selected and an operator enters three successive invalid
account numbers, the copier will not accept another number for one
minute and the message “
PLEASE SEE YOUR KEY OPERATOR FOR
ASSISTANCE. ” will appear.
To enable the account number security function, press the
check box of “ACCOUNT NUMBER SECURITY.” to display a
check mark in the check box.
To disable this function, press the check box of this program
again to clear the check mark in the check box.
KEY OPERATOR PROGRAMS
KEY OPERATOR’S GUIDE
Key operator programs