Sharp AR-407 - Manual (Page 71)

3-37
CHAPTER
3
10 Press the lower “OK” key.
● The TEXT STAMP menu will appear again.
11 Select the print direction.
● If the PAMPHLET COPY function is used with this function, the
portrait orientation ( ) must be selected.
12 Press the upper “OK” key.
13 Make all other desired copier selections and enter the
desired number of copies.
14 Press the START ( ) key.
● If the document feeder is used, scanning of originals and copying
will start.
● If the document glass is used, proceed to the next step.
15 Replace the finished original with the next original after
the START (
) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
● Copying will start at this time.
● Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
● To cancel the SELECT STAMP function, select the SELECT
STAMP function again and press the “CANCEL” key.
POSITION
CANCEL OK
OK
DATE
SELECT
STAMP
PRINT
DIRECTION
PAGE
NUMBER
WATERMARK
DATE
SELECT
STAMP
TION
PAGE
NUMBER
WATERMARK
OK
OK
1 2 3
4 5 6
7 8 9
0 P
PROGRAM AUDIT CLEAR
INT
CA
CLEAR ALL
START
SPECIAL FUNCTIONS
Text stamp
TEXT STAMP
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4