Siemens Gigaset E450 - Manual (Page 30)

29
Connecting the base station to the PABX
Gigaset E450 / USA EN / A31008-M1702-R301-2-6019 / pabx.fm / 19.12.06
Connecting the base station
to the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide for your PABX.
Dialing modes and flash time
The current setting is indicated by .
Changing the dialing mode
The following dialing modes can be
selected:
u Tone dialing (DTMF),
u Pulse dialing (DP).
v
¢
Ð
¢
Base
¢
Add. Features
¢
Dialing Mode
s Select dialing mode ( = on)
and press §OK§ .
a Press and hold (idle status).
Setting the flash time
v
¢
Ð
¢
Base
¢
Add. Features
¢
Flash
s Select flash time ( = on)
and press §OK§ .
a Press and hold (idle status).
Setting pauses
Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c and sending the number.
v
Open menu.
5 5 O 1 L
Press keys.
~ Enter digit for the pause
length (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press §OK§ .
Changing the pause after the flash key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v Open
menu.
5 5 O 1 2
Press keys.
~ Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press §OK§ .
Changing the dialing pause
v Open menu.
5 5 O 1 1
Press keys.
~ Enter a digit for the length of
the pause (1 = 1 sec.;
2 = 2 secs.; 3 = 3 secs.;
4 = 6 secs.) and press §OK§ .
To insert a dialing pause: press e for
2 seconds. A P appears in the display.
Switching temporarily to
tone dialing (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need tone dialing (DTMF) for
a connection (for example to listen to the
network mailbox) you must switch to tone
dialing for the call.
Requirement: You are conducting a call
or have already dialed an external
number.
§Options§ Open menu.
Tone Dialing
Select and press §OK§ .
Tone dialing is now activated
for this call only.
‰
‰
‰