Siemens Gigaset E450 - Manual (Page 20)

19
Using several handsets
Gigaset E450 / USA EN / A31008-M1702-R301-2-6019 / registr_sett.fm / 13.4.07
De-registering handsets
You can de-register any registered handset
from any registered Gigaset E45 handset.
u
Open list of internal users.
The handset you are currently
using is indicated by <.
s Select the internal user you
wish to de-register.
§Options§ Open menu.
De-reg. H/Set No.
Select and press §OK§ .
~ Enter current System PIN and
press §OK§ .
§Yes§ Press the display key.
Locating a handset ("paging")
You can locate your handset using the
base station.
¤
Press the registration/paging key on the
base station briefly.
¤
All handsets will ring at the same time
("paging"), even if the ringers are
switched off.
Ending paging
¤
Briefly press the registration/paging
key on the base station or press the talk
key c on the handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception ( Best Base ).
v
¢
Ð
¢
Handset
¢
Select Base
s Select one of the registered
base stations or Best Base and
press §OK§ .
Making internal calls
Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the hand-
set.
Or:
u
Initiate internal call.
s Select handset.
c Press the talk key.
Calling all handsets ("group call")
u Initiate internal call.
* Press the star key. All handsets
are called.
Ending a call
a Press the end call key.
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
u
Open list of handsets.
The external caller hears the
hold melody if activated see
page 27.
s Select a handset or Call All and
press §OK§ .
When the internal participant answers:
¤
If necessary announce the external call.
a Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer
or is busy, press the display key §End§ , to
return to the external call.
When diverting a call you can also press
the end call key a before the internal
participant lifts the receiver.