Siemens Gigaset E450 - Manual (Page 28)

27
Base station settings
Gigaset E450 / USA EN / A31008-M1702-R301-2-6019 / registr_sett.fm / 13.4.07
Base station settings
The base station settings are carried out
using a registered Gigaset E45 handset.
Protecting against unauthorized
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must now be entered
when, for example, registering/de-regis-
tering a handset to/from the base station
or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only to yourself.
v
¢
Ð
¢
Base
¢
System PIN
~ Enter current System PIN and
press §OK§ .
~ Enter new system PIN. For
security the PIN is shown as
four stars (****).
s ~ Scroll to the next line, re-enter
new system PIN and press §OK§ .
a Press and hold (idle status).
Activating/deactivating the
hold melody
v
¢
Ð
¢
Base
¢
Music on hold
Press §OK§ to activate or deactivate the hold
melody ( = on).
Restoring default settings for
the base station
When resetting, all handsets remain regis-
tered. The following settings are not reset:
u System PIN
v
¢
Ð
¢
Base
¢
Base Reset
~ Enter the system PIN and
press §OK§ .
§Yes§ Press the display key.
Cancel the restoring process by pressing
a or the display key
§No§ .
a Press and hold (idle status)
Caution:
Memorize the new system PIN well! If you for-
get it, the phone will require specialist atten-
tion. If this happens, contact the Siemens
Hotline (page 35).
‰