Siemens Gigaset E450 - Manual (Page 19)

18
Using several handsets
Gigaset E450 / USA EN / A31008-M1702-R301-2-6019 / registr_sett.fm / 13.4.07
Using several handsets
Registering handsets
You can register up to a total of six hand-
sets on your base station.
A Gigaset E45 handset can be registered
on up to four base stations.
Automatic registration Gigaset E45 to
Gigaset E450
Important: The handset must not yet be
registered to any base station.
Registering the handset to the Gigaset
E450 base station occurs automatically.
¤
Place the handset in the base with its
display facing forward.
Registration takes around 1 minute. Dur-
ing this process, Regstr.Procedure appears
in the display and the name of the base
station flashes, for example Base 1 . When
the handset has been registered, its
screen displays its internal number, for
example INT 2 for internal number 2. The
handset is assigned the lowest available
internal number (1-6). If all internal num-
bers 1-6 have been assigned, number 6 is
overwritten, assuming that the handset
with the internal number 6 is in idle sta-
tus.
Manual registration of Gigaset E45 to
Gigaset E450
You must activate manual registration of
the handset at both the handset and the
base station.
After it has been registered, the handset
returns to idle status. The internal number
of the handset appears in the display, for
example INT 1 . If it does not, repeat the
procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
s Select base station, for exam-
ple Base 1 and press §OK§ .
~ Enter the system PIN of the
base station (the default is
0000) and press §OK§ .
The screen will display the
number, for example Base 1 .
On the base station
¤
Within 60 secs. press and hold the reg-
istration/paging key next to the charg-
ing cradle on the base station
(approx. 3 secs.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in the user guide for this par-
ticular handset.
On the base station
¤
Within 60 secs. press and hold the
registration/paging key next to the
charging cradle on the base station
(approx. 3 secs.).
Notes:
– Automatic registration is not possible when
the base station on which you wish to reg-
ister the handset is being used to make a
call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset
(page 21).