Sanyo PLC WM5500L - Manual (Page 64)

64
When you want to make a digital processing of a projected
image faster, set this function.
Use the Point ▲▼ buttons, select an item of Off/Low/Mid/High.
Digital processing speed becomes fast by order of Low → Mid →
High. High is the fastest.
Video delay control
Fig .1
Note:
-The following functions are not available respectively when Video delay
control is set to Low/Mid/High.
Low ... Keystone can not be selected.
Mid ... Progressive and Noise reduction can not be selected.
High ... Keystone, Progressive and Noise reduction can not
be selected.
-When Video delay control function is set to Low or High and press the
KEYSTONE button on the remote control, Fig.1 will be dispalyed on the
bottom left screen. Video delay : On
Setting
Closed caption
Closed caption is a printed version of the program sound or other
information displayed on the screen. If the input signal contains
Closed captions, you can turn on the feature and switch the
channels. Press the Point
▲▼ buttons to select Off, CC1, CC,
CC or CC4.
If the Closed caption is not clear, you can change the text from
Color to White.
Closed caption
Note:
The Closed caption is available only under the situation below..
• When the input signal is
• When the input signal is NTSC of composite and S-video,
and the system is set according to the signal or set on Auto.
• The system must be set on NTSC or Auto in Video System
Selection. (p.45)
• The item of Closed caption is displayed in gray while it is not
available.
• Closed caption is unavailable when On-Screen Menu and
P-timer are displayed.
Press the Point ▲▼ buttons to
select Off, CC1, CC, CC or CC4,
and then Press Select button.