Sanyo PLC WM5500L - Manual (Page 30)

0
Press the FREEZE button on the remote control to freeze the picture
on the screen and Audio mute. To cancel the FREEZE function, press
the FREEZE button again or press any other button.
Fig.1 will appear when the Freeze function is working.
FREEZE button
FILTER button
Press and hold the FILTER button for more than five seconds to
operate electrically operated filter to replace the filter.
Remote Control
POINTER button
FILTER button

Note:
See the previous page for the description of
other buttons.
MOUSE
POINTER button
Basic Operation

Note:
• The filter cannot be rewound.
• When the filter is replaced, the total accumulated time of the
filter use is automatically set to 0.
FREEZE button
P-TIMER button
Move the pointer on the screen with this button.
MOUSE POINTER button
POINTER button
Press POINTER button on the remote control to display the Pointer
on the screen.
Press the P-TIMER button on the remote control to operate the
Count up/Count down function. Refer to p.60 for detail of Setting for
the P-timer function.
To stop the count time, press the P-TIMER button.
To cancel the P-timer function, press and hold the P-TIMER button
for a few seconds.
P-TIMER button
Fig.1
PIP button
Press the PIP button on the remote control several times until the
desired mode of Picture in Picture appears. Each user mode (User
1-5) appears only when it has stored data.
Press and hold the PIP button for more than 3 seconds to display
the setting dialog box of Picture in Picture. See pages 55-56 for
details of Picture in Picture function.
PIP button
User 1 of PIP (example)
User of PIP (example)
Main picture
Sub
picture
Sub
picture
Main picture