Sanyo PLC WM5500L - Manual (Page 38)

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has
10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific
computer.
Use the Point
◄► buttons to adjust the value, eliminating a flicker
from the image displayed (from 0 to 31).
Use the Point
◄► buttons to adjust the number of total dots in one
horizontal period to match your PC image.
Use the Point
◄► buttons to adjust the horizontal picture position.
Use the Point
◄► buttons to adjust the vertical picture position.
Press the SELECT button to show H-sync freq. and V-sync freq. of
the connected computer.
Use the Point
◄► buttons to adjust the clamp level. When the
image has dark bars, try this adjustment.
Use the Point
◄► buttons to adjust the horizontal area displayed
by this projector.
Use the Point
◄► buttons to adjusts the vertical area displayed by
this projector.
Computer Input
PC adjust Menu 1
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select PC adjust and then press the
Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired item and then
press the SELECT button to display the adjustment dialog box.
Use the Point ◄► buttons to adjust the setting value.
Auto PC adj.
Fine sync
Total dots 1366
Position H 0
Position V 0
Current mode
Clamp 0
Display area H 1024
Display area V 768
Reset
Mode free
Store
0
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Manual PC Adjustment