Now you can see main menu, Overwrite – SVAT Electronics CV503-8CH User Manual

Page 31

CV503-8CH-19M

SVAT ELECTRONICS

now you can see

MAIN MENU

HDD

This option gives you information about your HDD (Hard Disk Drive), allows you to enable overwrite mode and format

the hard drive and/or USB drive.

The information this option includes:

• HDD Status:

Displays the current operating status of the hard drive. If the Hard Drive is functioning

normally it will display OK

• Total Space:

The total size of the HDD

• Free Space:

How much space is available on the HDD

• Usable Rec. Time: Amount of remaining time available to record

HDD Menu

Overwrite

When the HDD is overwrite enabled, the CV503-8CH will continue to record over the oldest footage rather than stop

recording when HDD is full. Disabling this option will prompt recording to stop when the hard drive is full.

To Enable/Disable overwrite mode:
1. Select the drop down list next to “OVERWRITE.”
2. Select “ENABLE” to use overwrite or “DISABLE” to turn overwrite mode off.
3. Select “APPLY” to save settings.