SVAT Electronics CV503-8CH - Manual (Page 22)

CV503-8CH-19M 19
SVAT ELECTRONICS
now you can see
MAIN MENU
Auto Sequence
This option allows you to choose the duration for each camera on the screen while in auto sequencing mode; choose
anywhere from zero to ten seconds. You can also choose whether to sequence only channels one through four or five
through eight for a specific duration.
To Adjust Automatic Sequencing:
1. Select “AUTOSEQ” from Camera Setup menu.
2. Navigate to and select desired channel and
a drop down list, select desired duration.
3. Select “APPLY” to save settings.
Auto Sequence Menu
RECORD SETUP
This menu option allows you to turn on or off
each camera, adjust the video quality, choose
a recording mode or decide on the recording
segment length.
Channel (On/Off)
To turn channels on or off from recording:
1. Select the drop down list next to
to
the channel you would like adjusted.
2. Navigate to and select whether or not to record the channel.
3. Select “APPLY” to save settings.
Quality
To change the quality of the recorded video:
1. Navigate to and select the quality level you would like to choose (BEST, GOOD or NORMAL). Selecting “BEST” will
provide you with the best video quality but will also use up the most HDD space.
2. Select “APPLY” to save settings.