John Deere SURFACE WATER PRO OMPFP11362 - Manual (Page 35)

Ditch
JS56696,00009E2 ­19­12MAY11­1/1
Set Tracking Mode to Ditch Track
NOTE: Ditches must be recorded from high to low, but can
be cut in either direction. If the track is not recorded
from high to low, the drain design software in
Surface Water Pro Plus does not function correctly.
Select MENU softkey >> GREENSTAR 3 PRO softkey >>
GUIDANCE softkey >> GUIDANCE SETTINGS tab.
Select DITCH TRACK in TRACKING MODE drop­down
box (A).
NOTE: Selecting Ditch Mode can be found in the GS3
Guidance area, not in the Surface Water Pro area.
A—Guidance Settings tab B—Tracking Mode drop­down
box
PC8663 —UN—05AUG05
MENU softkey
PC12685 —UN—14JUL10
GREENSTAR 3 PRO softkey
PC8673 —UN—14OCT07
GUIDANCE softkey
PC10857BU —UN—15JUL08
Guidance Settings tab
PC13728 —UN—17MAY11
40­3 061611
PN=35