JBL SYNTHESIS SDP-40HD - Manual (Page 94)

Setup JBL
3-54
VOLUME CONTROL SETUP
Opens the VOLUME CONTROL SETUP menu, to configure the Main
Zone, Zone 2, and Record Zone volume levels.
VOLUME CONTROLS SETUP
MAIN PWR ON LAST LVL, -80 to +6dB
Selects the volume level at which the Main Zone activates. When a
value is selected, the SDP-40HD automatically sets the Main Zone
volume level to the selected value when the Main Zone is activated.
When LAST LVL is selected, the SDP-40HD sets the Main Zone
volume level to the last volume level that was selected in the Main
Zone during the previous operating session.
MUTE LEVEL -10dB, -20dB, -30dB, -40dB, FULL MUTE
Determines the amount of attenuation that occurs in the Main
Zone when the Mute button is pressed. When a value is selected,
the Main Zone volume level is attenuated to the selected value
when the Mute button is pressed. When FULL MUTE is selected, the
Main Zone volume level is fully attenuated when the Mute button is
pressed.
ZONE PWR ON LAST LVL, -80 to +6dB
Sets the Zone 2 volume level for the output connector labeled Var
to the selected value when Zone 2 is activated. When a value is
selected, the Zone 2 volume level is automatically set to the
selected value when Zone 2 is activated. When LAST LVL is selected,
the SDP-40HD sets the Zone 2 volume level to the last volume level
that was selected in Zone 2 during the previous operating session.
SETUP VOLUME CONTROLS
Parameter Default Setting Possible Setting
MAIN PWR ON -30dB LAST LVL, -80 to +6dB
MUTE LEVEL FULL MUTE -10dB, -20dB, -30dB, -40dB,
FULL MUTE
ZONE PWR ON -30dB LAST LVL, -80 to +6dB
REC PWR ON -30dB LAST LVL, -80 to +6dB
MAX VOLUME +6dB -80 to +6dB
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
VOLUME CONTROL SETUP
MAIN PWR ON
MUTE LEVEL
ZONE PWR ON
-10dB
-20dB
REC PWR ON
-30dB
-40dB
FULL MUTE
-30dB
-30dB
-30dB
-30dB
LAST LVL, -80 to +12dB
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
+12dB MAX VOLUME
SETUP VOLUME CONTROLS MAIN PWR ON
SETUP VOLUME CONTROLS MUTE LEVEL
SETUP VOLUME CONTROLS ZONE PWR ON