JBL SYNTHESIS SDP-40HD - Manual (Page 22)

Basic Operation JBL
2-10
COMMAND BANK ACTIVATION
Remote control buttons perform different commands depending on
whether the Main Zone, Zone 2, Record Zone, or Shift command
bank is activated. Pressing and releasing a remote control command
bank selection button – MAIN, ZONE, REC, or SHIFT – activates the
corresponding command bank. The selected command bank
remains active until another command bank is activated.
The command bank selection buttons themselves do not send
commands to the SDP-40HD. When pressed and released, these
buttons activate the corresponding command bank. For example,
pressing and releasing the SHIFT button activates the Shift
command bank. When the Shift command bank is activated,
pressing and releasing the DVD-1 button turns off the Main Zone.
See Command Matrix, page 2-11.
To activate a command bank:
1. Press and release a command bank selection button to activate
the desired command bank.
The command matrix that begins on the next page indicates
which commands the remote control buttons perform when
each command bank is activated.
2. Press a remote control button to send a command to the
SDP-40HD.
The MAIN MENUSETUPDISPLAYSON-SCREEN DISPLAY
menu REMOTE STATE parameter controls the remote control
command bank indicator that appears on the on-screen display.
When the REMOTE STATE parameter is set to ON, a command
bank indicator appears in the top-right corner of the on-screen
display to indicate the last command bank from which the
SDP-40HD received a command. A “Z” appears to indicate Zone 2.
An “R” appears to indicate the Record Zone. An “S” appears to
indicate the Shift command bank. No letter appears when the Main
Zone command bank is active. When the REMOTE STATE
parameter is set to OFF, no command bank indicator appears on
the on-screen display.
Note:
Remote control command bank selection buttons should not be pressed
and held.