Mode adjust, Panorama calibration – JBL SYNTHESIS SDP-40HD User Manual
Page 121
SDP-40HD
Mode Adjust
5-13
PANORAMA CALIBRATION
Select PANORAMA
CALIBRATION to open
the PANORAMA CALIBRATION menu shown
to the left, to calibrate the PANORAMA
listening mode. This listening mode must be
calibrated to take full advantage of its
effects.
For best results, you should center the
primary listening position between the front
left and right speakers as shown in the Center illustration at the top
of the next page. Otherwise, the PANORAMA listening mode will be
calibrated with varying results.
An external calibration source is required to calibrate the
PANORAMA listening mode. You should select a familiar stereo
source.
See page 5-35 for detailed parameter descriptions.
To calibrate the Panorama listening mode, refer to the instructions
on the following page.
MODE ADJUST
PANORAMA
CALIBRATION
Parameter
Default Setting Possible Settings
SOURCE
LEFT & RIGHT
RIGHT, LEFT & RIGHT, LEFT
SPEAKER ANGLE
30deg
10deg to 90deg
LISTENER POS
+0
-127 to +127
PANORAMA CALIBRATION
SOURCE
SPEAKER ANGLE
LISTENER POS
NOTE:
ENSURE THAT
“SPEAKER SETUP” HAS
BEEN PROPERLY
PERFORMED
LEFT & RIGHT
30deg
+0