Setup – JBL SYNTHESIS SDP-40HD User Manual
Page 60
Setup
JBL
3-20
CONFIGURING ADVANCED INPUT SETTINGS
(continued)
INPUT SELECT
DIGITAL, ANALOG, AUTO
Controls the interaction of the digital and analog audio input
connectors assigned to the current Main Zone input. The table on
the next page describes INPUT SELECT parameter settings.
Note:
When the Shift command bank is activated, the 7/5 button adjusts the
INPUT SELECT parameter by cycling through the DIGITAL, ANALOG,
and AUTO settings.
ANALOG BYPASS
ON, OFF
Forces analog sources to bypass A/D conversion and internal
processing. When ON, analog input signals pass directly to the
Main Zone audio output connectors.
•
When a 2-channel analog source is present, analog input signals
pass directly to the Front L/R output connectors.
•
When a 5.1-channel analog source is present, analog input
signals pass to the Main Zone audio output connectors as
indicated in the tables on page 1-8 and page 3-47.
•
When OFF, the SDP-40HD passes analog input signals through
A/D conversion and internal processing before passing them to
the Main Zone audio output connectors. This allows analog
sources to use bass management, speaker crossovers, speaker
distance calibration, and tone controls.
Note:
When the Shift command bank is activated, pressing the 2CH button
toggles ANALOG BYPASS between ON and OFF.
S-VIDEO 16:9
AUTO, OFF
Controls the passage of anamorphic trigger signals present in some
video sources. When set to AUTO, the SDP-40HD allows
anamorphic video input signals to pass through the S-video
switcher, enabling compatible display devices to automatically
switch between anamorphic and non-anamorphic display modes.
When OFF, the SDP-40HD prevents anamorphic video input signals
from passing through the S-video switcher, preventing compatible
display devices from automatically switching between anamorphic
and non-anamorphic display modes.
INPUTS
SETUP
DVD1
MAIN ADVANCED
INPUT SELECT
INPUTS
SETUP
DVD1
MAIN ADVANCED
ANALOG BYPASS
INPUTS
SETUP
DVD1
MAIN ADVANCED
S-VIDEO 16:9