Setup – JBL SYNTHESIS SDP-40HD User Manual

Page 54

Setup

JBL

3-14

When a preferred listening mode is selected, that listening mode is
automatically activated whenever a new input is selected or an
appropriate input source is present. For example, the following can
occur when a preferred listening mode is activated (also refer to the
corresponding menus on page 3-13):

If the DVD1 input is selected and a 2-channel source is played, the
L7 FILM listening mode is activated. If a Dolby Digital source is
played, the 5.1 L7 FILM listening mode is activated. If a DTS(-ES)
source is played, the DTS(-ES) L7 FILM listening mode is activated.

Dynamic Listening Modes

Dynamic listening modes are only available under certain conditions.
For example, many of the dynamic modes are only available when

the SDP-40HD is configured for seven main output channels and
source material with specific encoding is played. All Dynamic
Listening Modes are available through the remote control or front
panel Mode button. The dynamic listening modes are listed in the
table below.

Modes That Do Not Appear in the Input Setup Menu

The SDP-40HD features the ability to assign preferred listening modes
for each input and incoming audio format. However, not all listening
modes will appear in the Input Setup Menu. Listening modes that do
not appear in the Input Setup menu as preferred listening modes
under any circumstances are listed in the table at the bottom of the
page.

Dynamic modes

2-Channel

Dolby Digital

DTS

5.1mc

Dolby PLIIx + THX

Dolby Digital or Dolby Digital EX

DTS THX or DTS THX UL2Cin or DTS(-ES) THX

5.1mc THX MUSIC

Dolby PLIIx MOV

THX or THX UL2Cin or THX SurEX

DTS or DTS(-ES) MATRIX or DTS(-ES) DISCR

Dolby PLIIx MUS

THX MUSIC

DTS THX MUSIC

DTS Neo:6 + THX

5.1 PLIIx MOV

DTS L7 FILM or DTS(-ES) L7 FILM

DTS Neo:6 CIN

5.1 PLIIx MUS

DTS L7 MUSIC or DTS(-ES) L7 MUSIC

DTS Neo:6 MUSIC

DTS 2-CHAN or DTS(-ES) 2-CHAN

Modes that do not appear in the Input Setup menu