JBL SYNTHESIS SDP-40HD - Manual (Page 56)

Setup JBL
3-16
SELECTING PREFERRED LISTENING MODES (continued)
The Use Last Parameter
When the SDP-40HD is set to use a preferred listening mode for a
selected input, selecting another mode from the Mode scroll list
replaces the preferred selection. However, this newly selected mode
will be lost when switching between inputs.
The USE LAST parameter was designed to allow the SDP-40HD
software to “remember” the last used listening mode for a given
input source. Once selected, that mode will always be active on the
corresponding input until another listening mode is selected as
demonstrated in the following example:
1. Select Main Menu SETUP INPUTS DVD1 USE
LAST.
2. Press the MENU button.
3. Press the DVD-1 button.
4. Play a DTS input source.
5. Press the MODE + button until you reach DTS(-ES) 2-CHAN.
6. Press the TV button
The SDP-40HD switches to the TV input and the on-screen
display identifies the preferred listening mode.
7. Press the DVD-1 button.
The on-screen display should identify that the active listening mode
for the DVD1 input is still DTS(-ES) 2-CHAN. As the DTS(-ES)
2-CHAN mode is a preferred listening mode, it can also be set in
the SETUP menu.
When seven speakers are selected in the SPEAKER SETUP menu, and
the appropriate source material is played, the dynamic listening
mode (or mode that does not appear in the input setup menu) can
always be accessed using the MODE + or MODE - buttons whether
or not a preferred mode is set. When a preferred listening mode is set
and a dynamic listening mode (or mode that does not appear in the
input setup menu) is active, the selected dynamic mode is lost when
switching between inputs.
When USE LAST is selected as the preferred listening mode, and a
dynamic listening mode (or mode that does not appear in the input
setup menu) is active, the selected listening mode is retained when
switching between inputs, even when the SDP-40HD is set to
standby as in the following example:
1. Select Main Menu SETUP INPUTS DVD1 2-CH USE
LAST.
2. Press the MENU button.
3. Press the DVD-1 button.
4. Play a 2-channel input source.
5. Press the MODE + button until you reach PLIIx MOV.
PLIIx MOV is a dynamic listening mode.
6. Press the TV button
The SDP-40HD switches to the TV input and the on-screen
display identifies the preferred listening mode.
7. Press the DVD-1 button.
The on-screen display should identify that the active listening mode
for the DVD1 input is still
PLIIx MOV. This is the only method of
setting up a dynamic mode (or mode that does not appear in the
input setup menu) to behave like a preferred listening mode.