JBL SYNTHESIS SDP-40HD - Manual (Page 93)

SDP-40HD Setup
3-53
FRONT-PANEL DISPLAY
Opens the FRONT PANEL DISPLAY menu, to customize the front panel display.
DISPLAY DISPLAYS SETUP
STATUS ALWAYS ON, 2 SECONDS, ALWAYS OFF
Controls the activation of the front-panel display. When ALWAYS ON
is selected, the front panel display remains activated at all times.
When 2 SECONDS is selected, the front-panel display activates for
two seconds whenever a new input source is present or a new
command is received. When ALWAYS OFF is selected, the front panel
display remains deactivated at all times, and will not reactivate until
the STATUS parameter is reset to ALWAYS ON or 2 SECONDS.
Note:
If both the on-screen and front panel displays are inadvertently turned
off, pressing the DISPLAY button on the remote control always turns
the front panel display on.
BRIGHTNESS 100%, 75%, 50%, 25%
Controls the illumination of front panel display characters. When a
setting is selected, front panel display characters automatically
adjust to the selected illumination percentage.
DISPLAYS SETUP FRONT PANEL DISPLAY
ALWAYS ON
2 SECONDS
ALWAYS OFF
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
DISPLAY SETUP
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY
CUSTOM NAME
EDIT CUSTOM NAME
OFF
OFF
100%
FRONT PANEL DISPLAY
STATUS
BRIGHTNESS ALWAYS ON
75%
75%
50%
25%
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
Parameter Default Setting Possible Settings
STATUS ALWAYS ON ALWAYS ON, 2 SECONDS,
ALWAYS OFF
BRIGHTNESS 75% 100%, 75%, 50%, 25%
DISPLAYS SETUP FRONT PANEL DISPLAY STATUS
DISPLAYS SETUP FRONT PANEL DISPLAY BRIGHTNESS