beautypg.com

Basic operation – JBL SYNTHESIS SDP-40HD User Manual

Page 18

background image

Basic Operation

JBL

2-6

15. Main Audio Output Connectors

16. Microphone Input Connectors

17. Trigger Output Connectors

18. Digital Audio Input Connectors (AES/EBU, S/PDIF, & OMJ)

19. Balanced Audio Output Connectors

20. Analog Audio Input Connectors

CAUTION!

Never make or break connections to the SDP-40HD unless
the SDP-40HD and all
associated components are powered
off.

1 S-VIDEO INPUT CONNECTORS

Provides video input to the Main and Record Zones. Three S-video
connectors labeled S-VIDEO 1 to 3 are available.

2 COMPOSITE VIDEO INPUT CONNECTORS

Provides video input to the Main and Record Zones. Two
composite video connectors labeled VIDEO 1 and 2 are available.

3 COMPONENT VIDEO INPUT CONNECTORS

Provides video input to the Main Zone. Four sets of component
video connectors (three RCA and one BNC) labeled INPUT 1 to 4
are available. The component video connectors are not available for
the Record Zone.

4 HDMI INPUT CONNECTORS

Provides HDMI audio/video input to the Main Zone (not available for
the Record Zone). Six HDMI connectors labeled HDMI 1 to 6 are
available.

Note:

A DVI (Digital Visual Interface) device can be connected to the
SDP-40HD through a DVI-to-HDMI cable or adaptor. DVI carries video
but no audio.

5 HDMI OUTPUT CONNECTOR

Provides HDMI output from the Main Zone. One HDMI output
connector is available. The HDMI OUT connector supports HDCP
(High-bandwidth Digital Content Protection).

Note:

A DVI (Digital Visual Interface) device can be connected to the
SDP-40HD through a DVI-to-HDMI cable or adaptor. The DVI device
must be HDCP compliant.

6 MAIN VIDEO OUTPUT CONNECTORS

Provides video output from the Main Zone. Two composite video
connectors, two S-video connectors, and one set of component
video connectors (BNC) are available. The composite and S-video
connectors labeled 1 (OSD), and the component video connectors
incorporate the on-screen display.

Composite video output is available when a composite or S-video
source is present.

S-video output is available when an S-video source is present.