JBL SYNTHESIS SDP-40HD - Manual (Page 81)

SDP-40HD Setup
3-41
CALIBRATION (continued)
PERFORMING SPEAKER DISTANCE CALIBRATION
Selecting the MANUAL SPEAKER SETUP menu SPEAKER DISTANCES option displays the SPEAKER DISTANCES menu, to manually calibrate
speaker distances.
To manually calibrate speaker distances:
1. Follow the menu path shown above to select SPEAKER
DISTANCES. The SPEAKER DISTANCES menu shown above will
open on the on-screen display.
2. Press the or arrow button to highlight the desired
speaker distance parameter. Then, press the arrow button
to select the highlighted speaker distance parameter.
3. To determine the appropriate speaker distance, measure the
distance between the primary listening position and the front
of the speaker.
For example, when the FRONT LEFT parameter is selected,
measure the distance between the primary listening position
and the front of the front left speaker (connected to the Main
Zone audio output connector labeled Front L).
4. When the speaker distance has been measured, press the
or arrow button to set the parameter to the closest available
value.
SPEAKERS SETUP MANUAL SPEAKER DISTANCES
MANUAL SPEAKER SETUP SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
0.0ft 0.0ft
SET CROSSOVERS
BEFORE CALIBRATING
CUSTOM SETUP SPEAKER DISTANCES
FRONT LEFT
CENTER
FRONT RIGHT
SIDE RIGHT
REAR RIGHT
REAR LEFT
SIDE LEFT
MONO SUB
SUB RIGHT
LFE
UNITS 0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
0.0ft
N/A
N/A
FEET METERS
FEET
0.0 to 30.0ft or 12.0m
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SPEAKER DISTANCES
CUSTOM SETUP
40 Hz
60 Hz
60 Hz
60 Hz
40 Hz
OFF
N/A
APART
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7 CH SETUP
C
R SR RR
L SL RL M
SUB
80Hz 80Hz 80Hz
80Hz
80Hz 80Hz 80Hz 80Hz
SPEAKER DISTANCES
LEVELS CALIBRATION