JBL SYNTHESIS SDP-40HD - Manual (Page 57)

SDP-40HD Setup
3-17
Note:
When a dynamic mode (or mode that does not appear in the input setup
menu) is set as in the above example, the setting is retained even when
the SDP-40HD is set to standby.
2-CH
Opens the 2-CH MODE menu, to select a preferred listening mode
for 2-channel input sources. The SDP-40HD activates the preferred
listening mode whenever a new input is selected or a new
2-channel source is present.
When the 2-CH parameter is set to USE LAST:
• The SDP-40HD uses the listening mode that was activated the
last time a 2-channel source was present.
• The remote control 2 CH button toggles between the
2-CHANNEL listening mode and the previous listening mode,
and ignores the USE LAST setting. Instead, it uses the listening
mode (for example, L7 FILM) that was activated before the
2-CHANNEL listening mode.
• The SDP-40HD will automatically activate a DTS NEO:6
listening mode if a DTS NEO:6 listening mode was activated the
last time a 2-channel source was present, and 44.1kHz or 48kHz
PCM digital source is present. Since the DTS NEO:6 listening
modes are dynamic, they cannot be selected as the preferred
listening mode for 2-channel sources.
D
Opens the DOLBY DIGITAL MODE menu, to select a preferred
listening mode for Dolby Digital input sources. The SDP-40HD
activates the preferred listening mode whenever a new input is
selected or a new Dolby Digital source is present.
When the D parameter is set to USE LAST:
• The SDP-40HD uses the listening mode that was activated the
last time a Dolby Digital source was present.
• If the THX MUSIC listening mode was activated the last time a
Dolby Digital source was present, then the THX MUSIC
listening mode is used. Since THX MUSIC is a dynamic listening
mode, it cannot be selected as the preferred listening mode for
Dolby Digital sources.
Opens the DTS(-ES) MODE menu, to select a preferred listening
mode for DTS(-ES) input sources. The SDP-40HD activates the
preferred listening mode whenever a new input is selected or a new
DTS(-ES) source is present.
When the DTS(-ES) parameter is set to USE LAST:
• The SDP-40HD uses the listening mode that was activated the
last time a DTS(-ES) source was present.
• The DTS(-ES) THX MUSIC listening mode is used if this listening
mode was activated the last time a DTS(-ES) source was
present. Since DTS(-ES) THX MUSIC is a dynamic listening
mode, it cannot be selected as the preferred listening mode for
DTS(-ES) sources.
INPUTS SETUP DVD1 2-CH
INPUTS SETUP DVD1 D
INPUTS SETUP DVD1