JBL SYNTHESIS SDP-40HD - Manual (Page 28)

Basic Operation JBL
2-16
MENU NAVIGATION
Use the remote control Menu and arrow buttons to navigate the
extensive menu structure shown in the Appendix. The table below
indicates the navigation commands that the remote control
buttons perform when the Main Zone command bank is activated. MAIN MENU
The MAIN MENU represents the
beginning of the menu structure. Use
the MAIN MENU to open the three main
menu branches: MODE ADJUST, AUDIO
CONTROLS, and SETUP.
MENU ITEM SELECTION Use the remote control Menu arrows to select menu items.
Button Navigation Function(s)
• When no menus are displayed, press the MENU button to open the MAIN MENU.
• When a menu is open, press the MENU button to close the menu structure.
• When no menus are displayed, press the arrow button to open the MAIN MENU.
• When a menu is open, press the arrow button to select the highlighted menu item.
• When a menu is open, press the arrow button to close the menu and, in most cases, open the previous
menu. Subsequent presses continue to close the current menu and open the previous menu until the MAIN
MENU is closed. When the MAIN MENU is closed, the menu structure is also closed.
• When no menus are displayed, pressing the arrow button performs no function.
• When a drop-down menu is open, press the arrow button to select the current setting and close the drop-
down menu.
• When a menu is open, press the or arrow buttons to scroll upward or downward through the complete
list of menu items. All menu items are displayed on-screen. A scroll bar appears on the left side of the menu
when menu items exceed the top and bottom margins of the display, and the cursor automatically advances
to the next menu item when the first or last menu item is passed. The highlighted menu item is displayed on
the SDP-40HD front panel.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP