Juniper Networks ERX Hardware 8 - Manual (Page 41)

Chapter 2
Unpacking and Inspecting ERX Routers
This chapter reviews shipping contents and unpacking procedures for ERX routers.
It contains the following sections:
Before You Begin on page 23
Unpacking ERX-14xx Models on page 23
Unpacking ERX-7xx Models and ERX-310 Routers on page 24
Inspecting Router Components and Accessories on page 25
If You Detect or Suspect Damage on page 25
Contacting Juniper Networks on page 25
The Next Step on page 25
Before You Begin
Before you begin unpacking the router, be sure you have the following tools:
A No. 2 Phillips screwdriver
A utility knife
A mechanical lift, or at least two people to assist in lifting
Unpacking ERX-14xx Models
ERX-14xx models come boxed, bolted, and strapped to a skid. For
your convenience, we recommend that you unpack the router in the
location where you want to install it.
WARNING: Three people are required to install the router in a rack: two to lift the
system into position and one to screw it to the rack.
To unpack ERX-14xx models:
Unpacking ERX-14xx Models 23