Juniper Networks M7I User Manual
Page 96
•
SONET alarms:
•
Alarm indication signal—line (AIS-L)
•
Alarm indication signal—path (AIS-P)
•
Bit error rate signal degrade (BERR-SD)
•
Bit error rate signal fail (BERR-SF)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of pointer (LOP)
•
Loss of signal (LOS)
•
Payload label mismatch (PLM-P)
•
Remote defect indication—line (RDI-L)
•
Remote defect indication—path (RDI-P)
•
Remote error indication (REI)
•
Payload unequipped (unequipped STS at path level) (UNEQ-P)
•
SDH alarms:
•
Administrative unit alarm indication signal (AU-AIS)
•
Bit error rate signal degrade (BERR-SD)
•
Bit error rate signal fail (BERR-SF)
•
Bit interleaved parity (BIP) error B1, B2, B3
•
Higher order path—alarm indication signal (HP-AIS)
•
Higher order path—far-end receive failure (HP-FERF)
•
Higher order path—payload label mismatch (HP-PLM)
•
Higher order path—loss of pointer (HP-LOP)
•
Higher order path—remote defect indication (HP-RDI)
•
Higher order path—unequipped (HP-UNEQ)
•
Loss of frame (LOF)
•
Loss of light (LOL)
•
Loss of signal (LOS)
•
Multiplex section—alarm indication signal (MS-AIS)
•
Multiplex section—far-end receive failure (MS-FERF)
•
Multiplex section—remote defect indication (MS-RDI)
•
Multiplex section—remote error indication (MS-REI)
•
Phase lock loop (PLL)
•
Remote error indication (REI)
•
Severely errored frame (SEF)
Alarms, errors, and
events
•
Layer 2 per-queue and per-channel packet and byte counters
Instrumentation
(counters)
Related
Documentation
M7i PICs Description on page 3
•
•
•
M7i PIC/CFEB Compatibility on page 11
Copyright © 2010, Juniper Networks, Inc.
96
M7i Multiservice Edge Router PIC Guide