IBM 201 User Manual
Page 86
The IBM PC ServeRAID Adapter diagnostics test program runs independently of the
operating system and is run from diskette. You can obtain a copy from the
ServerGuide Diskette Factory or download it from IBM’s web site.
To back up the ServeRAID configuration:
1. From the Main Menu, select Advanced Functions
2. Select Backup IPS ServeRaid Config
You can use the ServeRAID Subsystem Diagnostic program to test the PC
ServeRAID Adapter and the devices connected to it. To test the ServeRAID
subsystem:
1. Start the ServeRAID Configuration Utility program
2. Select Advanced Functions from the Main Menu and press Enter
3. Select IBM ServeRAID Subsystem Diagnostic from the next menu and press
Enter
4. Select the diagnostic test that you want to run and press Enter . Descriptions of
the diagnostic tests available include:
Run Adapter Self-tests
Tests the PC ServeRAID Adapter. Restart the server after the self-test
completes.
SCSI Device Self-test
Runs diagnostic tests on the SCSI devices attached to the PC
ServeRAID Adapter.
Troubleshooting the Integrated System Management Processor
1. Insert the ISMP Utility CD-ROM into the CD-ROM drive and restart the NAS 200
engine. If the engine does not boot from the CD-ROM, use POST/BIOS setup to
configure the CD-ROM drive as a boot device.
2. After the engine boots, the main option menu appears. The main menu contains
the following selections:
v Hardware Status and Information
v Configuration Settings
v Update System Management firmware
3. Use the up and down arrow keys to select Hardware Status and Information
and press Enter. The Hardware Status and Information menu contains the list
of ISMP devices with the following diagnostic test results:
Processor Communication
: Passed
->
Built in Self Test Status ......
: Passed
Boot Sector Code Revision ...
:6, Build ID: RIET62A
Main Application Code Revision
:4, Build ID: ILET15A
Processor Communication
: Passed
->
Built in Self Test Status ......
: Passed
Boot Sector Code Revision ...
:6, Build ID: WMICT60A
Main Application Code Revision
:4, Build ID: WMXT57A
4. Use the up and down arrow keys to select the device you want to look at in
more detail. Press Enter. You will see a list of tests and results on the device:
Current System Management Processor Status
Current BIST Results:
SRAM Memory Test:
Passed
Serial Port 1 Test :
Passed
Serial Port 2 Test:
Passed
NVRAM Memory Test
Passed
Realtime Clock Test
Passed
Programmable Gate Array Test:
Passed
74
NAS 200 User’s Reference