IBM Dual AMD OpteronTM SFF Barebone ZMAXdp - Manual (Page 67)

SFF Workstation Installation Guide
User’s Manual 67
BIOS Security Menu
The system can be configured so that all users must enter a password every time the system
boots or when BIOS Setup is entered, using either the Supervisor password or User password.
The Supervisor and User passwords activate two different levels of password security. If you
select password support, you are prompted for a one to six character password. Type the
password on the keyboard. The password does not appear on the screen when typed. Make sure
you write it down. If you forget it, you must clear CMOS and reconfigure.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item on top
of the screen shows the default Not Installed. After you have set a password, this item shows
Installed.