beautypg.com

IBM Dual AMD OpteronTM SFF Barebone ZMAXdp User Manual

Page 49

background image

SFF Workstation Installation Guide

User’s Manual 49

Internal Connectors

IDE1, IDE2: IDE Drive Connectors

The two IDE drive connectors are marked IDE1, the primary channel, and IDE2, the secondary

channel. Each connector supports two drives, a Master and a Slave.

Pin 20 on each IDE connector is removed to match the covered hole on the UltraDMA

cable connector. This prevents incorrect orientation when you connect the cables. For

UltraDMA100/66 IDE devices, use an 80-conductor IDE cable.

The red stripe of the ribbon cable must be the same side with the Pin1.