Intel SERVER BOARD SDS2 - Manual (Page 71)

Intel® Server Board SDS2 BIOS
Revision 1.2
Order Number: A85874-002
57
Feature Option Description
Transfer Mode Standard
FPIO 1
FPIO 2
FPIO 3
FPIO 4
FPIO 3 / DMA 1
FPIO 4 /DMA 2
Select the method for moving data to/from the drive.
This field is informational only, for Type Auto.
This field is updated to display only the modes
supported by the attached device.
Ultra DMA Mode Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Selects the Ultra DMA mode used for moving data
to/from the drive.Autotype the drive toselect the
optimum transfer mode.
Table 34. Processor Settings Submenu Selections
Feature Option Description
Processor Retest No
Yes
If yes, BIOS will clear historical processor status and
retest all processors on the next boot.
Processor POST
speed setting Information Only Displays measured processor speed.
Processor 1 CPUID CPUID
Not Installed
Disabled
Reports CPUID for Processor 1, if present. If empty,
reports Vacant. If disabled by BMC, reports
Disabled.
Processor 1 L2
Cache Size Information Only Displays L2 Cache Size for Processor 1.
Processor 2 CPUID CPUID
Not Installed
Disabled
Reports CPUID for Processor 2, if present. If empty,
reports Vacant. If disabled by BMC, reports
Disabled.
Processor 2 L2
Cache Size Information Only Displays L2 Cache Size for the next Processor.