Motorola III - Manual (Page 98)

MAEPF-22628-O
A, T, C, D 97
97 Trunked Radio Features Operation
(cont.)
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
Call Alert Page Operation (cont.)
Answering a Call Aler t Page With a Private
Conversation II Call (800 MHz Only)
1. When a Call Alert page is being received, you will
hear a recurring four-beep tone until the call is
answered or the radio is reset. The display will
alternate between showing the current talkgroup
and “PAGE RECEIVED.” The green LED and the call
received status annunciator will flash to indicate
that a page is being received.
Note: Any button press, keypad press, or mode
change (except for the light button or volume
control) will turn the Call Alert audible and visual
indicators off.
2. Press the call response button or the call button
(both programmed via the RSS), or press the right
arrow key until the display shows “CALL,” then
press the key below “CALL.” The display will show
the ID number of the radio that paged you.
3. Press the PTT switch to transmit the ID number.
The ID number of the calling radio is stored as the
“last ID number received.”
4a. If the party you are calling does not answer the
call, go to step 6 of this procedure to hang up.
or
4b. If the party you are calling does answer the call,
you will hear his/her voice.
5. Press the PTT switch to carr y on a Private
Conversation with the called person.
6. When you have finished your conversation, or if the
radio you are calling does not answer, press the
HOME key or the page button to hang up. The
radio will return to the home display.