beautypg.com

108 trunked radio features operation (cont.) – Motorola III User Manual

Page 109

background image

108 Trunked Radio Features Operation

(cont.)

108

Dynamic Regrouping (cont.)

Select Enable and Disable

The dispatcher may classify regrouped radios into either of two categories:

“select enabled,” and “select disabled.”

Select-enabled radios are free to make mode changes to any available mode,
including the dynamic regrouping mode.

Select-disabled radios cannot change modes, since the dispatcher has
specifically chosen to force the radio to remain in the dynamic mode.

Note: Scan, Phone, and Private Conversation cannot be selected while the
radio is select disabled.

Caller ID Display

The Caller-ID feature will momentarily display the 6-digit ID or alias name of

the radio that initiated a talkgroup call, call alert, or a private call. Two options are
available: Caller ID and Aliased Caller ID.

1.

Caller ID will display the 6-digit ID of the radio which initiates a group or
individual call.

2.

Aliased caller ID will display the 6-digit ID of the radio which initiates a
group or individual call. If the ID of the radio which initiates the call is in
the pre-programmed call list of your radio, your radio will display the
alias name instead of the 6-digit ID.

Caller ID When an Emergency Call is Received

If the emergency receive indication is enabled in your radio and an emergency
call is received, your radio will alternate the display between the ID (or alias
name) of the radio that initiated the emergency call, the emergency received
display, and the talkgroup (Zone/Chan assignment).

ID: 700001” “EMER RECEIVED” “POLICE NORTH

Notes:

Only the ID of the radio that initiates the conversation will be displayed on
your radio. If other radio users continue the conversation without
allowing the channel to drop, their IDs will not be displayed on your radio.

This feature is not available on Type I Trunked Systems.

Programmable Home Mode Button

The HOME key may be programmed via the RSS as a mode preset button.
The Programmable Home Mode Button allows you, the radio operator, to
preset a commonly used mode for quick access.

1.

Select the desired mode using the channel selector or the zone and
channel menu keys.

2.

Press and hold the HOME key until a good-key tone is heard.

3.

Your HOME key is now programmed to the currently selected mode.

4.

When operating on any mode in your radio, a short press of the HOME
key will cause the radio to immediately change to the preset mode.

This manual is related to the following products: