Motorola III - Manual (Page 104)

MAEPF-22628-O
U, V, J, K, L, M 103
103 Trunked Radio Features Operation
(cont.)
Call Alert Page Operation (cont.)
Paging an ID Number at a Location in the Call List
1. You can also Call Alert page an ID number at a
particular location in the preprogrammed call list
(for example, the fifth location in the list would be
position “5”). To do this, press the right arrow key
( ) until “PAGE” appears on the display.
Note: The same list is shared by both Call Alert
and Private Conversation features.
2. Press the key below “PAGE.” The display changes
to show the last ID number transmitted or
received. You can now select an ID number from
the list.
3. To enter the list, press either the right ( ) arrow
key or the left ( ) arrow key. The right arrow key
will take you forwards to the first or next member
o f t h e l i s t ; t h e l e f t a r r o w k e y w i l l t a k e y o u
backwards to the last or previous member of the
list.
Note: The last member of the list will be the “last
ID transmitted or received.” This member can also
be found at location “00” in the list.
4. Enter the first digit of the location number.
a. If there are fewer than 10 members in the
list, the radio goes immediately to that position
in the list, and the display alternates between
showing that list member’s name and ID
number. Go directly to step 7.
b. If there are 10 or more members in the list,
the display changes to show “ID LOC#X_”
(where X is the first digit). The cursor will flash
to show the location of the second digit.
Continue with step 5.
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
3 D E F 2 A B C 1
HOME
2 A B C 3 D E F 1
Note: If your radio has been so programmed, you
can press the page button for quick access to the
Call Alert feature. This will take you directly to the
“last ID number transmitted or received” display
shown in step 2; skip to step 3.