beautypg.com

39 general radio features operation (cont.) – Motorola III User Manual

Page 40

background image

MAEPF-22627-O
E, F, G, G, H

39

39

General Radio Features Operation
(cont.)

Conventional Telephone Operation

The conventional telephone feature allows you to

use your conventional radio similar to a standard
telephone. To make a call through the telephone
system, your radio must send access and hangup
codes to the system. Unless otherwise indicated, the
conventional telephone sections in this manual assume
t h a t t h e a c c e s s a n d h a n g u p c o d e s h a v e b e e n
programmed into the radio by the RSS. These codes will
then be automatically transmitted.

When you are dialing from the keypad (MTS 2000

III model only), your radio may be programmed with
either

buffered dial (you enter all digits and press the

PTT before the digits are sent out) or

live dial (each digit

is sent out as it is pressed).

Calling the Last Number Dialed

1.

To send a telephone call to the last number dialed,
press the right arrow key ( ) until “PHON
appears on the display.

Note: If your radio has been so programmed, you
can press the phone button for quick access to the
telephone call feature. This will take you directly to
the ”last number dialed” display shown in step 2;
skip to step 3.

2.

Press the key below “PHON.” The display changes
to show the last telephone number dialed. At this
point, either:

3a. If your radio is programmed for immediate access,

the display shows “PLEASE WAIT” while your radio
attempts to access the telephone system. Go to
step 4.

Note: This is a timed message. If you cannot
access the telephone system (no dial tone heard),
you will have to press the HOME key to hang up,
and start again at step 1 of this procedure.

or

3b. If your radio is programmed for delayed access,

the display does not change. Press the PTT switch.
The display shows “PLEASE WAIT” while your radio
attempts to access the telephone system.

Note: This is a timed message. If you cannot
access the telephone system (no dial tone heard),
you will have to press the HOME key to hang up,
and start again at step 1 of this procedure.

HOME

2

A B C

1

3

D E F

6

MNO

5

JKL

4

G H I

7

P R S

8

TUV

9

W X Y

0

1

2

A B C

3

D E F

This manual is related to the following products: