Motorola III - Manual (Page 59)

58 General Radio Features Operation
(cont.)
MAEPF-22627-O
G, A-J, D 58
Trunked Telephone Operation (cont.)
4. When you have finished dialing your number, press
the PTT switch. The display shows “PLEASE WAIT”
while your radio attempts to access the telephone
system.
Notes:
• This is a timed message. If you cannot access
the telephone system (no dial tone heard), you
will have to press the HOME key or the phone
button to hang up, and start again at step 1 of
this procedure.
• If you are out of range of the trunked system or
the phone interconnect is out of service, “NO
PHONE” is displayed and a continuous low-pitched
tone sounds.
• If the trunked phone interconnect is in use, a busy
tone sounds and “PHONE BUSY” is displayed.
Your number will automatically be dialed when the
phone interconnect becomes available. If you hang
up, you will lose your place in line.
5. If the access was successful, you will hear a dial
tone. The display will again show the number dialed.
6. The telephone number will be sent out; you will hear
tones as they are being sent. When the number has
been completely sent out, you will hear either a busy
signal or ringing. If you hear a busy signal, go to
step 8 for hang-up procedure.
7. If the party you are calling answers, carry on with
your conversation in the normal manner. Press the
PTT switch to talk; release the PTT to listen.
Notes:
• After reaching the number you are calling, you
may need to dial an extension number before you
can reach your party. If this is the case, enter the
extension number from the keypad (MTS 2000 III
model only) or (if so programmed) use the arrow
k e y s t o f i n d t h e e x t e n s i o n n u m b e r i n t h e
telephone list. Press the PTT switch again to
send out the extension number.
• Motorola trunked radios generate a high-pitched
go-ahead tone when the radio's PTT switch is
released. This is heard by the land-line party and
is an indicator to begin talking.
8. When you have finished your conversation, or if the
number you are calling is busy or does not answer,
press the HOME key or the phone button to send
the hang-up code. The radio will return to the home
display.
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME