Motorola T1/E1 - Manual (Page 72)

Canopy T1/E1 Multiplexer September 2004
T1/E1 Multiplexer FPGA Version 3.4
Page 72 of 73
4.2.2 Department of Communications – Canada
Canadian Compliance Statement
This class B Digital apparatus meets all the requirements of the Canadian Interference-
Causing Equipment Regulations.
This device complies with RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) this device can not cause harmful interference; and (2) this
device must accept any interference received, including interference that can cause
undesired operation.
This device is certified to the requirements of RSS-139. The use of this device in a
system operating either partially or completely outdoors can require the user to obtain a
license for the system according to Canadian regulations. For further information, contact
your local Industry Canada office.
4.2.3 European Telecommunications Standards Institute
Statement of Compliance
Information to User
This equipment has been tested and found to comply with the European
Telecommunications Standard ETS 300.328. This standard covers Wideband Data
Transmission Systems referred to in CEPT Recommendation T/R 10.01.
This type accepted equipment is designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction manual, can cause harmful interference to
radio communications.
4.3 TRADEMARKS, PRODUCT NAMES, AND SERVICE NAMES
MOTOROLA, the stylized M Logo and all other trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat & Tm. Office. Canopy is a trademark of Motorola,
Inc. All other product or service names are the property of their respective owners.
Motorola, Inc
Broadband Wireless Technology Center
1299 East Algonquin Road
Schaumburg, IL 60196
USA
http://www.motorola.com/canopy
Issue 3