Figure 4: standard adapters for global use, Figure 3, On pag – Motorola T1/E1 User Manual
Page 12
Canopy T1/E1 Multiplexer
September 2004
T1/E1 Multiplexer FPGA Version 3.4
Page 12 of 73
Figure 3: Rear panel with standard 110-v source power supply
WARNING!
An external AC surge suppression device must be used with the Canopy
T1/E1 Multiplexer. For infrastructure installations, Canopy Engineering
recommends an AC line surge suppression unit that meets the standard
IEC 801-5 (EN61000-4-5) Maximum Surge Voltage (1.2x50µsec) 6 KV.
Figure 4: Standard adapters for global use
Issue 3