4 at commands, s-registers, and result codes – Multi-Tech Systems MT5634ZBAV User Manual
Page 77

4 AT Commands, S-Registers, and Result Codes
67
Command:
#CBFR Callback Failed Attempts Reset
Values:
n/a
Default:
n/a
Description:
Resets the number of failed callback passwords
to 0. This does not reset the number stored in
nonvolatile memory.
Command:
#CBI
n
Local Callback Inactivity Timer
Values:
n = 1–255
Default:
20
Description:
Sets the time (in minutes) that the modem waits
for a command before forcing the user to enter
the setup password again.
Command:
#CBN
y=x
Store Callback Password
Values:
y = 0–29
x = password
Defaults:
None
Description:
Sets the callback security password for the
y
memory location. The password must have 6 to
10 characters, and cannot include the
+ or -
characters.
Command:
#CBP
n Callback Parity
Values:
n = 0, 1, or 2
Default:
0
Description:
Sets parity for the callback security messages.
#CBP0
No parity.
#CBP1
Odd parity.
#CBP2
Even parity.