4 at commands, s-registers, and result codes – Multi-Tech Systems MT5634ZBAV User Manual
Page 69

4 AT Commands, S-Registers, and Result Codes
59
Command:
&V
Display Current Settings
Values:
n/a
Description:
Displays the active modem settings, including the
callback security settings if callback security is
enabled. If the setup password has been entered, it
also displays the callback security passwords.
Command:
&W
n
Store Current Configuration
Values:
n = 0
Default:
None
Description:
&W0
Stores current modem settings in nonvolatile
memory and causes them to be loaded at power-
on or following the ATZ command instead of the
factory defaults. See also the
&F command.
&W1
Clears user default settings from nonvolatile
memory and causes the factory defaults to be
loaded at power-on or following the ATZ com-
mand.
Command:
&Y
n
Select Stored Configuration for Hard Reset
Values:
n = 0
Default:
0
Description:
&Y0
Select stored configuration 0 on power-up. (For
backward compatibility with some software.)
&Y1
Not supported—responds
ERROR.