Multi-Tech Systems MT5634ZBAV - Manual (Page 101)

6 Callback Security
91
7. Type the same password that you used to initiate the call. You have
three attempts to enter the password or be disconnected.
8. If the password is valid, the following message appears and the
modems establish a working connection:
OK Connecting
Number-Entry Callback
Mobile callers should use this procedure when calling from a phone
number different from that stored with the password. The password that
is used must be set up for optional number-entry callback.
1. Using a data communications program such as HyperTerminal, dial
the number of the callback modem..
2. When the connection is established, the callback modem responds
with the following message:
Password>
3. Type a number-entry password, press the plus key (+), type ATDT
and the number to call back to, and press ENTER You have three
attempts or one minute to enter a valid password.
Note: When you type your phone number, be sure to include the
long distance and area codes, if needed.
4. If the password is valid, the following message appears and the
modems disconnect:
OK Disconnecting
5. After the delay specified by the #CBDn command, the callback mo-
dem calls the number that you entered after the + character. If the