User guide – Multi-Tech Systems MT5634ZBAV User Manual
Page 74
User Guide
64
Command:
\X
n
XON/XOFF Pass-Through
Values:
n = 0 or 1
Defaults:
0
Description:
\X0
Modem responds to and discards XON/XOFF
characters.
\X1
Modem responds to and passes XON/XOFF
characters.
Command:
-C
n
Data Calling Tone
Values:
n = 0 or 1
Defaults:
0
Description:
-C0
Disable V.25 data calling tone to deny remote
data/fax/voice discrimination.
-C1
Enable V.25 data calling tone to allow remote
data/fax/voice discrimination.
Command:
%B
View Numbers in Blacklist
Values:
n/a
Description:
If blacklisting is in effect, AT%B displays the
numbers for which the last call attempted in the
previous two hours failed. In countries that do not
require blacklisting, the
ERROR result code ap-
pears.
Command:
%C
n
Data Compression Control
Values:
n = 0 or 1
Default:
1
Description:
%C0
Disable V.42bis/MNP 5 data compression.
%C1
Enable V.42bis/MNP 5 data compression.