4 at commands, s-registers, and result codes – Multi-Tech Systems MT5634ZBAV User Manual
Page 75
4 AT Commands, S-Registers, and Result Codes
65
Command:
%DC
n AT Command Control
Values:
n = 0 or 1
Default:
0
Description:
%DC0 The modem responds to AT commands.
%DC1 The modem ignores AT commands.
Note: The modem will respond to AT%DC for 10 seconds after power-up.
Command:
%E
n
Fallback and Fall Forward Control
Values:
n = 0, 1, or 2
Default:
2
Description:
%E0
Disable fallback and fall forward.
%E1
Enable fallback, disable fall forward.
%E2
Enable fallback and fall forward.
Command:
$D
n
DTR Dialing
Values:
n = 0 or 1
Default:
0
Description:
$D0
Disables DTR dialing.
$D1
Dials the number in memory location 0 when
DTR goes high.
Command:
$EB
n Asynchronous Word Length
Values:
n = 0 or 1
Default:
0
Description:
$EB0 Enables 10-bit mode.
$EB1 Enables 11-bit mode.