User guide – Multi-Tech Systems MT5634ZBAV User Manual
Page 108

User Guide
98
Command:
#S
x
Enter Setup Password
Values:
x= password (1–8 characters, case sensitive)
Default:
MTSMODEM
Description:
Enters the password used for callback security
and remote configuration setup. This command
allows the use of all callback security commands.
Command:
#S=
x
Store Setup Password
Values:
x= password (1–8 characters, case sensitive)
Default:
MTSMODEM
Description:
Stores a new password for callback security and
remote configuration setup.
Command:
&V
Display Current Settings
Values:
n/a
Description:
Displays the modem’s active settings, including
the telephone numbers stored in nonvolatile
memory and the security settings, if enabled. If
the setup password has been entered, the pass-
words are also displayed.
Command:
&Zy=[
+][-]x[,???]
Store Dialing Command
Values:
y = 0–29 (callback security enabled)
x = Dialing command string
Default:
None
Description:
Stores dialing command
x in memory location y.
The command string must begin with AT and can
have up to 35 characters. The telephone number
in the command must be preceded by D, DT, or
DP. Example: AT&Z0=+-ATM0D5551212,???.
During a call, if the + or - character is not entered
after the password, the modem will call back the
stored number. This command can be entered