Multi-Tech Systems MT5634ZBAV User Manual
Multi-Tech Systems Faxes
Table of contents
Document Outline
- Chapter 1: Introduction
- Chapter 2: Quick Start
- Introduction
- What You Will Need
- Safety Warnings
- Step 1: Assemble the Modem
- Step 2: Change the Internal Jumpers
- Step 3: Connect the Modem to Your System
- Step 4: Install the Modem in Windows
- Step 5: Install and Configure Your Software
- Step 6: Call the Multi-Tech BBS
- Step 7: Send a Fax
- Step 8: Test the MT5634ZBAV Voice Circuits
- References
- Chapter 3: Features
- Chapter 4: AT Commands, S-Registers & Result Codes
- Chapter 5: Remote Configuration
- Chapter 6: Callback Security
- Chapter 7: Solving Problems
- Introduction
- None of the Indicators Light
- The Modem Does Not Respond to Commands
- The Modem Dials But Cannot Connect
- The Modem Disconnects While Online
- The Modem Cannot Connect When Answering
- File Transfer Is Slower Than It Should Be
- Data Is Being Lost
- There Are Garbage Characters on the Monitor
- The Modem Doesn't Work with Caller ID
- Fax and Data Software Can't Run at the Same Time
- Appendix A: Regulatory Compliance
- Appendix B: Technical Specifications
- Appendix C: Loopback Tests
- Appendix D: Warranty, Service, and Technical Support
- Appendix E: Upgrade Procedures
- Index