Multi-Tech Systems MT5634ZBAV - Manual (Page 63)

4 AT Commands, S-Registers, and Result Codes
53
Command: O n Return Online to Data Mode
Values: 0, 1, 3
Default: None
Description: O0 Exit online command mode and return to data
mode (see +++AT escape sequence ).
O1 Issue a retrain and return to online data mode.
O3 Issue a rate renegotiation and return to data
mode.
Command: P Pulse Dialing
Values: P, T
Default: T
Description: Configures the modem for pulse (non-touch-tone)
dialing. Dialed digits are pulsed until a T com-
mand or dial modifier is received.
Command: Q n Result Codes Enable/Disable
Values: n = 0 or 1
Default: 0
Description: Q0 Enable result codes.
Q1 Disable result codes.
Q2 Returns an OK for backward compatibility with
some software.
Command: S r=n Set Register Value
Values: r = S-register number; n varies
Default: None
Description: Set value of register S r to value of n, where n is
entered in decimal format. E.g., S0=1.