4 at commands, s-registers, and result codes – Multi-Tech Systems MT5634ZBAV User Manual
Page 65
4 AT Commands, S-Registers, and Result Codes
55
X1
Extended result codes (
e.g., CONNECT 46000
V42bis); does not look for dial tone or busy sig-
nal.
X2
Extended result codes with
NO DIALTONE; does
not look for busy signal.
X3
Extended result codes with
BUSY; does not look
for dial tone.
X4
Extended result codes with
NO DIALTONE and
BUSY.
X5
Extended result codes with
NO DIALTONE and
BUSY.
X6
Extended result codes with
NO DIALTONE and
BUSY.
X7
Basic result codes with
NO DIALTONE and
BUSY.
Command:
Y
n
Long Space Disconnect
Values:
n = 0
Default:
0
Description:
Y0
Disable sending or responding to long space
break signal on disconnect.
Y1
Enable sending or responding to long space
break signal on disconnect. (Not supported.)
Command:
Z
n
Modem Reset
Values:
n = 0 or 1
Default:
None
Description:
Z0
Reset modem to profile saved by the last
&W
command.
Z1
Same as
Z0.