Minolta FAX2900 - Manual (Page 194)

7.7 Setting Up the Transmission 7
7-57
Usi
ng the Util
it
y
M
ode
Ch
apte
r 7
3 Using t the [ ] and [ ] keys,
select the desired resolution
setting, and then press the [Yes]
key.
❍ The resolution settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
H/T: Half Tone
If “H/T” was selected, a screen appears, allowing you to make a detailed setting.
(Continue with step 4.)
If any setting other than “H/T” was selected, the “TX OPERATION” menu
appears again.
4 Using the [ ] and [ ] keys,
select the desired halftone setting,
and then press the [Yes] key.
❍ The halftone settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
The “TX OPERATION” menu appears again.
Specifying Setting for “DEFAULT TX”
1 Select the “TX OPERATION”.
❍ Refer to “Selecting the “TX OPERATION” menu .
2 Press the [3] key from the 10-Key
Pad to select “DEFAULT TX”.
3 Using the [ ] and [ ] keys,
select either “MEM.TX” or “ADF
TX”, and then press the [Yes] key.
The “TX OPERATION” menu
appears again.