Minolta FAX2900 - Manual (Page 179)

7 7.6 Setting Up the Fax Registration
7-42
Usi
ng the Util
it
y
M
ode
Ch
apte
r 7
2 Press the [4] key from the 10-Key
Pad to select “PROGRAM DIAL”.
3 Press the one-touch dial key ([61]
through [64]) programmed with the
mailbox transmission that you
wish to change or delete.
4 Press the [No] key.
5 Using the [ ] and [ ] keys,
select either “EDIT” or “DELETE”,
and then press the [Yes] key.
❍ If “EDIT” was selected, the
specified recipient is
displayed. (Continue with step 6.)
❍ If “DELETE” was selected, the program dialing settings are deleted and the
“SELECT REGIST.KEY” screen appears again.
6 To change the recipient, press the
[No] key, and then by using the
one-touch dial keys or the speed
dial numbers, or by entering the
fax number using the 10-Key Pad,
specify a different recipient.
7 Press the [Yes] key.
The mailbox ID is displayed.
8 To change the mailbox ID, press
the [No] key, and then use the 10-
Key Pad to enter the new ID.
9 Press the [Yes] key.
The password is displayed.