Minolta CF910 - Manual (Page 52)

3-20
M
a
ki
ng
C
o
pi
es
Chapter 3
4. Input Output Mode
NOTE
Only CF Paper can be used for 2-sided copies.
(Only when the Duplexing Document Feeder and Duplex
Unit are mounted.)
• Select 2 2 to make 2-sided copies from 2-sided originals
Touch
2 2
Original Copy
1136P207AA
(Only when the Duplexing Document Feeder is mounted.)
• Select 1 [2in1] to make a 1-sided copy, through
reduction, from two 1-sided originals side-by-side.
NOTES
• You need half as many sheets of copy paper as the number
of originals.
• The size of the original should be LetterC for 2-in-1.
Touch
1 [2in1] = 1-sided 2-in-1 copy
Originals Copy
1136P208AA
1-Sided Book
Book Original 1-Sided Copies
Each of the two pages of an open book is copied onto one
side of a separate sheet of paper.
Touch , then
touch or
1136P219AA
2-Sided Book
Book Original 2-Sided Copy
(Only when the Duplex Unit is mounted.)
The two pages of an open book are copied onto opposite
sides of a sheet of paper.
Touch , then
touch or
1136P220AA
(Only when Duplexing Document Feeder and Duplex Unit
are mounted.)
• Select 1 2[2in1] to make a 2-sided copy, through
reduction, from four 1-sided originals. Each pair of
originals will be placed side-by-side on either side of the
copy.
NOTES
• You need 1/4 as many sheets of copy paper as the number
of originals.
• The size of the original should be LetterC for 2-in-1.
Touch
1 2[2in1] = 2-sided 2-in-1 copy
1136P210AA
Originals Copy